HENRI SYSTEMS HOLLAND

Henri Systems Holland B.V.

Henri Systems Holland B.V. - Henri Systems Holland (HSH) was founded in 1984 by a small group of passionate and experienced people in the field of marine instrumentation. Based on the many years of work in the field and the organizational spirit of its founders, the company was able to take over the marine branch of ENRAF NONIUS and lead it to a new era of groundbreaking technologies.

All the knowledge of its members has been used from the beginning to achieve a high level of quality for all its products. Using new materials and new designs, HSH could achieve spectacular results in a short period of time, extending its market worldwide and becoming a successful market leader. The growth of the company is also a result of the good relations with all its clients, which are built on mutual trust and respect. The needs of HSH’s customers are always taken into consideration and are handled with the highest care.

HSH has always taken pride in delivering and servicing its products at the highest level of quality possible. The low maintenance needed for its devices and the precision of its instrumentation made HSH the main supplier of level gauges for LPG end LNG gas carriers for most of the new ships.

All the final products are ATEX certified by the major class societies and can be safely mounted on LPG and LNG carriers.

Considerable funds are directed to research and improvement of new generations of products. We invest about 8% of our revenue in research. We are in the process of developing of a new type of LNG sensor for LNG Bunker tanks in cooperation with TNO Research Institute. It is our vision to also become the market leader in LNG bunker measurement. This permanent desire to be the best made HSH world leader in our field of activity. We actually are three times bigger than our main competitor regarding the quantity of delivered level measuring devices and the number of vessels equipped with HSH marine instrumentation.

Products

Float Type Level Gauge 807

The FTLG 807 is the most successful level gauge for LPG carriers. The FTLG 807 is an upgrade of the FTLG 806 which production has been discontinued. The experience of the last 27 years with the FTLG 806 has been used to make a very good level gauge and even a better one.

Accuracy and reliability is what counts on gas carriers. The FTLG 807 makes it possible to “see” what is going on inside the cargo tanks. The ease of operation and maintenance, have been the key elements in the design philosophy.

With over 400 gas carriers equipped with our level gauges, reliability is not a question. Henri Systems Holland has proven for many years on virtually all types of gas and chemical carriers, from small pressurized gas tankers to large LNG carriers.

Specfications

Performance
Measuring range: 0 – 37 m
Max. working pressure: 2.0 MPa (20 bar)

Min. cargo temperature: – 165 °C
Max. cargo temperature: + 90 °C
Min. ambient temperature: – 20 °C
Max. ambient temperature: + 60 °C

Material Specifications
Gauge head : SUS / AISI 316 (1.4404)
Measuring drum : SUS / AISI 316 (1.4404)
Measuring wire : AISI 316 (1.4408) or Invar 36
Float : SUS / AISI 316L
Weight: ± 65 kg

Float Type Level Gauge 808

YOU ARE HERE: HOME/Float Type Level Gauge 808
Float Type Level Gauge 808
The level gauge type 808 is special designed for use on inland river tankers. They have a very easy to read indicator scale that allows clear reading at a long distance. The housing is made of aluminum so that a long life is guaranteed.

With over 400 gas carriers equipped with our level gauges, reliability is not a question. It has been proven for many years on virtually all types of gas carriers. From small pressurized gas tankers to large LNG carriers.

Specfications

Performance
Measuring range: 0 – 6 m
Accuracy*: DL = ± (2.0 + 0.15 L) mm where L is the measured level

Repeatability*: ± 2 mm
Sensitivity*: ± 1.5 mm
Max. working pressure: 2.0 MPa (20 bar)
Min. cargo temperature: – 48 °C
Max. cargo temperature: + 90 °C
Measuring range: 0 – 6.000 mm
* At max. inclination of 10 degrees

Material Specifications
Gauge head: Aluminium (painted)
Measuring drum: Aluminium
Measuring wire: Braided AISI 316
Magnet seperation: SUS AISI 316 (stainless steel pipe)
Coupling magnets: Stainless steel encapsulated SmCo
Float: AISI 316
Weight: ± 25 kg

X-BOB Bunker Overfill Protection

HSH delivers a Bunker Overfill Protection for Marine Gas Fuel the so called X-BOB. The bunker overfill security sensor is a technical device to prevent outflow of fuel during bunkering and it is designed following the existing regulations.

X-BOB sensors and associated electronics are already being used for some time in international shipping as 95% and 98% alarms and are approved by classification societies such as Lloyds, ABS, DNV, Veritas etc.

The X-BOB sensors have a Lloyds General Approval (doc. No. MDA / 95.E.591)

Specfications

Sensors
Operating temperature range: -50 .. + 100 °C
Pressure range: 0 … 16 bars (abs)
Safety Intrinsically safe EEx ia IIC T5
Sensor material AISI 316 / quartz

Control station
Operating temperature: -5 … + 70 °C
Environment: 5 … 95% RH, non-condensing
Safety: Intrinsically safe [EEx ia IIC]
Power supply: 24 VDC / 115 ”’ 230 VAC
Capacity (per 19′ rack): 32 double alarms or 64 single alarms

Lamp panel
Operating temperature: -5 … + 70 °C
Environment: 5 … 95% RH, non-condensing
Power supply: From control station
Capacity: 96 double alarms or 192 single alarms
Communication: RS-232C or RS-485 (selectable)

High Level Alarm HLA 907

The HSH High level Alarm 907 (HLA 907) is a reliable high level alarm instrument for tankers with a liquid cargo. The HSH HLA 907 series marine high level alarm is a float type high level alarm with a stainless steel construction to provide a secure base for the high level alarm in cargo tanks.

The HLA 907 series marine level gauge can be used on all types of ships carrying liquid products. The HSH marine high level alarm system can be equipped with up to 3 alarm contacts. The alarm generated by the device can be used by a wide variety of cargo handling systems.

The HLA 907 has an advanced testing functionality. The floats are lifted via a magnetic connection from the top of the tank. The main advantage is that no extra tank entry is necessary and gas leakage into the junction box or the Cargo Control Room is almost impossible. The only entry into the tank is a fully welded construction with a standard 6″ 150 LBS / 300 LBS flange.

The switching contacts are reed contacts with integrated Namur resulting in continuous control of cable failure.

Specfications

Instrument type
Float Type Level Alarm with guiding tube.

Explosion safety
Type: II 1/2G Ex ia IIC T4 -40≤Ta≤ 60°C
Standards: EN 60079-0:2009, EN 60079-11:2007,
EN 60079-26:2007, EN 13462-1:2009

Products
Type of products: Liquids, including liquefied gasses
Viscosity: ≤ 100 mPa.s
Solids content: ≤ 100 g/l
Particle size: ≤ 200 μm diameter
Density: 0,4 to 2,0 kg/l

Operating conditions
Maximum pressure: 18 barg
Product Temperature: -164 to +120 °C
Ambient Temperature: -40 to +60 °C

Housing
Housing material: Stainless steel 316.
Connection: Cablegland Ex-i
Protection class: IP66

Tank connection
Standard: 6” – 150 LBS / 300 LBS
Other flanges on request.

Optical Alarm System

The HSH-TOPAS Level Alarm System consists of only three main elements:

Infra-red optical level alarm sensors
A control station
A panel for visual and audible alarm presentation
What makes the HSH – TOPAS High level and overfill Alarm Systems stand out:

No moving parts
Infra-red optical level sensors
Fibre-optics capabilities
All stainless steel construction
All stainless steel construction
EC-Type Examination Certificate Number: KEMA 03ATEX1470

II (1)G [EEx ia] IIC (Controller)

II 1G EEx ia IIC T5 (Sensor type 748)

Specfications

Sensors
Operating temperature range: -25 to + 70 °C
Pressure range: 0 to 16 bars (abs)
Safety Intrinsically safe EEx ia IIC T5
Sensor material AISI 316 / quartz

Control station
Operating temperature: -5 to + 70 °C
Environment: 5 to 95% RH, non-condensing
Safety: Intrinsically safe [EEx ia IIC]
Power supply: 24 VDC / 115 ”’ 230 VAC
Capacity (per 19′ rack): 32 double alarms or 64 single alarms

Lamp panel
Operating temperature: -5 to + 70 °C
Environment: 5 to 95% RH, non-condensing
Power supply: From control station
Capacity: 96 double alarms or 192 single alarms
Communication: RS-232C or RS-485 (selectable)

Remote Indicator 821

The HSH AMTG Series Remote Level Indicators are designed for centralized display of liquid levels in cargo tanks, measured with the HSH / Enraf 806 and the FTLG 807 series level gauges.

Additionally, output signals are provided by means of plug-in type PCB’s for communications with remote data acquisition systems and / or analog or digital indicators.

EC-Type Examination Certificate Number:
KEMA 03ATEX1469 II (1)G [EEX ia] IIC

Specfications

Dimensions
Panel cut-out: 138 x 89 mm
Font dimensions: 146 x 100 mm
Depth behind panel: 60 mm
Weight: approx. 850 g
Max. ambient temperature: + 70 °C
Min. ambient temperature: – 25°C

Performance
Measuring range: 0 – 99999 mm
Measuring speed: max. 1000 mm/sec
Accuracy: ± 1 mm
Power consumption: 1.3 Watt nom. / 4.2 Watt max.

Parallel output: 5 characters BCD TTL
Measuring range: 0 – 65535 mm
Accuracy: ± 1 mm

Analog Output
Measuring range: 0 – 8000 mm / 16000 mm / 32000 mm
Accuracy: ± 0,04% of max. measuring range
Resolution: 16 bits

Level alarm outputs
Measuring range: 0 – 65535 mm
Accuracy: ± 1 mm
Max. contact rating: 1 A # 24 VDC / 0.5 A # 120 VAC 24 W /60 VA

Electrical
Transmission circuit Ex II (1) G [EEx ia] IIC
C max. (cabling): 460 nF
R max. (cabling): 150 Ohm / core
L max.: 0.8 mH
Power input: 12 V DC max.
Max. power consumption: 3 A max. per indicator (fully featured)

Options
Serial output: RS232 / RS485
Measuring range: 0 – 65535 mm
Accuracy: ± 1 mm
Min. update speed: 0.1 s
Baud rates: 9600 Baud
Format: 1 startbit / 8 databits / 1 stopbit

Software feature
Pre-setup – For accurate calibration of 4-20 mA signals
Extensive FTLG monitoring, predictive maintenance
Extended Log – A log is constantly logging all actions that can be monitored, e.g. times reference switch activated, occurred errors & alarms, total traveled distance.
Web-interface, for upgrade, serviceability and download of log
Settable alarms for all inputs
Full control of LCD brightness and contrast
PIN code security for important/advanced settings

TankGuard 831

The HSH Tankguard 831 has been designed for centralized display of cargo conditions, e.g. pressure/level/temperature in cargo tanks on vessels. The Tankguard 831 (TG831) is also equipped with hardware and software to monitor the HSH FTLG 806 & 807. The transmission circuit between level gauge and remote level indicator is intrinsically safe as well as fail-safe: it is continuously monitored and in case of a failure that would result in an erroneous level indication.

Additionally, input & output signals are provided for communications with remote data acquisition systems and/or analog or digital sensors, e.g. 4-20 mA and HART communication are supported, Modbus RS232 or RS485 and Modbus over TCPIP can be used for communications with AIS. The actual /average or voyage level is displayed by means of a digital LCD display. Depending on the settings the level can be displayed in “ullage” or “innage” mode with increments of 1 mm. “Innage” read out is most common (“zero” level at tank bottom).

The remote level indicators are designed for flush panel-mounting and can easily be incorporated in (cargo) control panels. As the indicators are solid state (no moving parts), no periodical maintenance is required.

Specfications

Dimensions
Panel cut-out: 138 x 89 mm
Font dimensions: 146 x 100 mm
Depth behind panel: 60 mm
Weight: approx. 850 g
Max. ambient temperature: + 70 °C
Min. ambient temperature: – 25°C

Performance
Measuring range: 0 – 99999 mm
Measuring speed: max. 1000 mm/sec
Accuracy: ± 1 mm
Power consumption: 1.3 Watt nom. / 4.2 Watt max.

Parallel output: 5 characters BCD TTL
Measuring range: 0 – 65535 mm
Accuracy: ± 1 mm

Analog Output
Measuring range: 0 – 8000 mm / 16000 mm / 32000 mm
Accuracy: ± 0,04% of max. measuring range
Resolution: 16 bits

Level alarm outputs
Measuring range: 0 – 65535 mm
Accuracy: ± 1 mm
Max. contact rating: 1 A # 24 VDC / 0.5 A # 120 VAC 24 W /60 VA

Options
Serial output: RS232 / RS485
Measuring range: 0 – 65535 mm
Accuracy: ± 1 mm
Min. update speed: 0.1 s
Baud rates: 9600 Baud
Format: 1 startbit / 8 databits / 1 stopbit